content of the article

13 tips magnesium machining

Popular tags

Top content

Military equipment manufacturing

Manufacture of military reinforced chassis

Military communication equipment

Military UAV structure

Magnesium gold elephant source shell

Military notebook all-in-one shell

Military reinforced computer case

Reinforce the chassis

CPCI reinforced computer case

VPX reinforced chassis

PCI/PCle reinforced chassis

ATR reinforced chassis

19-inch reinforced chassis

Liquid-cooled case

Liquid-cooled chassis through sidewalls

Modular liquid-through chassis

U6 module liquid-cooled chassis

Small channel liquid-cooled chassis

Large channel liquid-cooled chassis






CYANBAT Green Bat Technology is a digital manufacturing ecosystem that quickly delivers precision mechanical parts through its digital quotation platform and global partner network.
Learn more »

Let’s talk about 13 tips about magnesium alloy processing. We hope to help you and reduce a lot of mistakes when processing magnesium alloys.

Pay attention to the following points when processing magnesium alloy:

(1) Keep the knives sharp, the front and rear corners are of appropriate size, and avoid using dull, crimped or chipped knives;

(2) Adopt strong cutting with large feed rate to form thick chips and avoid small feed rate;

(3) When the feed amount is small, use mineral oil cooling to reduce heat generation

(4) At the end of cutting, the tool should be withdrawn immediately, otherwise the workpiece will continue to rotate and form small chips that may catch fire;

(5) Try not to use cutting fluid, especially water-soluble cutting fluid;

(6) In high-speed cutting situations where fine chips are produced, compressed air or carbon dioxide can be blown;

(7) The machine tool near the processing machine should be kept dry;

(8) Clean the chips frequently and store them in steel drums with lids;

(9) Sand or other hard objects adhered to the casting should be removed before machining;

(10) Avoid sparks caused by cutting tools hitting steel inserts;

(11) Smoke and fire are not allowed to approach the processing area;

(12) It is not allowed to accumulate swarf on the machine tool or work clothes. The dust and swarf should be removed frequently and stored in a labeled flame-retardant container with a lid;

(13) Ensure that there are sufficient fire extinguishing facilities where the operator can reach.