Using magnesium alloy castings instead of aluminum alloy castings can reduce the weight of the workpiece by 25-30% under the condition of equal strength. Magnesium alloys, like aluminum alloys, can be divided into two major categories: deformed (press-working) magnesium alloys and cast magnesium alloys according to the processing method.
In recent years, with the development of die-casting technology, die-casting magnesium alloy has become the main field of magnesium alloy application. In addition, the use of magnesium alloy as a sacrificial anode has also been greatly developed.
Magnesium is a light metal. Pure metallic magnesium is silver-white, which is easily oxidized in the air, forming a thin oxide film, which can prevent further oxidation.
Magnesium has high chemical activity, and it is difficult to encounter pure magnesium ore in nature. It exists as chloride in seawater, containing about 0.14%, and in the crust as carnallite, magnesite, dolomite and some other compounds, and the content reaches 2.35%.
Cast magnesium alloys are used more than wrought magnesium alloys. Cast magnesium alloy is the most widely used light alloy in the aviation industry. Using magnesium alloy castings instead of aluminum alloy castings can reduce the weight of the workpiece by 25-30% under the condition of equal strength.
Magnesium alloys, like aluminum alloys, can be divided into two major categories: deformed (press-working) magnesium alloys and cast magnesium alloys according to the processing method. In recent years, with the development of die-casting technology, die-casting magnesium alloy has become the main field of magnesium alloy application. In addition, the use of magnesium alloy as a sacrificial anode has also been greatly developed.
Magnesium is a light metal. Pure metallic magnesium is silver-white, which is easily oxidized in the air, forming a thin oxide film, which can prevent further oxidation.
Magnesium has high chemical activity, and it is difficult to encounter pure magnesium ore in nature. It exists as chloride in seawater, containing about 0.14%, and in the crust as carnallite, magnesite, dolomite and some other compounds, and the content reaches 2.35%.
Previous: Back to list Next: The use of magnesium alloy cutting oil
Source: @joe Author: @cyanbat
The CNC machining process also abides by the machining cutting rules, which is roughly the same as that of ordinary machine tools....
CNC machine tools are automated equipment integrating machine tools, computers, motors, and drag, motion control, detection and other technologies.
...
The application of CNC technology has brought about qualitative changes in the traditional manufacturing industry, especially in recent years....
Chassis and cabinet sheet metal fabrication process, including many steps from cutting and bending to surface preparation, assembly and more....
Aluminum shell is an aluminum product obtained by extrusion process, which is different from cast aluminum shell, but the difference in process is different....
In our production field, various machinery and equipment are used a lot, and the actual production efficiency is also very good....
In our daily life, sheet metal chassis is a very common product, such as computer mainframes, communication equipment, switches and other chassis,...
The application of sheet metal chassis in our daily life is very extensive, and its types are also various...
The production process and equipment of metal magnesium are relatively simple, the construction investment is less, and the production scale is flexible; the purity of the finished magnesium is high;...
With the continuous progress of society and the continuous improvement of science and technology, the production process of metal magnesium has become more and more mature....
The cylinder block is the heart of the engine, so its casting quality is critical, and if it is well controlled, it can avoid or reduce the risk of the car's heart hitting....
When aluminum alloy die-casting, the liquid metal contains a lot of gas, and if the smelting is not good at this time...
There are two main problems in the processing of magnesium alloys: the low ignition point and the slow heat dissipation of the processing will cause the phenomenon of blue burning....
2022-08-15 18:26:27
make smooth
Make smooth refers to a processing method that uses rough ob...
2022-08-15 18:02:21
Chemical Conductive oxidation
Conductive chemical oxidation forms a chromate film with a t...
2022-08-15 17:55:49
logo
In an increasingly competitive global market, strict managem...
2022-08-15 17:52:49
silk screen
During printing, through the extrusion of the scraper, the i...
2022-08-15 17:10:15
parts sandblasting
The process of cleaning and roughening the surface of the su...
2022-08-15 17:06:15
spray paint
A processing method in which paint is atomized by a spray gu...
2022-08-15 16:43:00
machining parts passivation
Passivation refers to the process in which the metal is oxid...
2022-08-15 16:37:42
machining parts brushed
Surface wire drawing is a surface treatment method that form...
2022-08-15 16:33:27
parts Micro-arc oxidation
Micro-arc oxidation, also known as plasma electrolytic oxida...
2022-08-15 16:22:19
Anodizing of machining parts
The so-called anodization of aluminum is an electrolytic oxi...