Stainless steel machining service

Sheet metal processing is thin-plate hardware processing, that is, a process that can be processed by punching, bending, stretching and other wrists.

Stainless steel Machining

Mainly used in aerospace, electronic communications, military, medical and other industries.

We understand the important balance of fast and accurate machining in tough materials like stainless steel.

Our 3~5 axis machining capabilities and quick setup tools allow us to achieve fast machining times and best value for every batch of stainless steel milled parts.

With over a decade of combined stainless steel milling experience, we are pleased to share our machining expertise and design advice to ensure the best possible outcome for your project.

grade tensile strength Elongation at break Yield Point density Maximum temperature tensile modulus
303 Stainless steel 620 MPa 50% 140 MPa 8 g/cm3 1420 °C 193 GPa
304 Stainless steel 505 MPa 70% 215 MPa 8 g/cm3 1455 °C 193 GPa
A316L Stainless steel 560 MPa 50% 290 MPa 8 g/cm3 925 °C 193 GPa
410S Stainless steel 1475 MPa 11% 1005 MPa 7.8 g/cm 815 °C 200 GPa
416Stainless steel 760 MPa 22.5% 585 MPa 7.8 g/cm3 760 °C 200 GPa

We are equipped with advanced 3-axis, 4-axis and 5-axis CNC machining centers, including Haas, Jingdiao and other high-speed CNC milling machines. We can handle a wide variety of magnesium and aluminum milling projects that require high precision and complex shape machining parts, with extremely tight tolerances and excellent surface finishes.

Most processing type Minimum Wall Thickness Minimum end mill size Minimum drill size Maximum part size Undercut Radius:Depth
Three-axis machining 1mm 1mm x 2mm x 2mm 0.5mm 1100mm x 800mm x 650mm [x,y,z] Square outline, full radius, dovetail outline Machining tolerance is +/- 0.01mm. It is recommended that all areas of the part should be thicker than 0.51mm
Four-axis machining 1mm 1mm x 2mm x 2mm 0.5mm 550mm x 350mm x 200mm [x,y,z] Square outline, full radius, dovetail outline Machining tolerance is +/- 0.01mm. It is recommended that all areas of the part should be thicker than 0.51mm
Five-axis machining 1mm 1mm x 2mm x 2mm 0.5mm 550mm x 350mm x 200mm [x,y,z] Square outline, full radius, dovetail outline Machining tolerance is +/- 0.01mm. It is recommended that all areas of the part should be thicker than 0.51mm

Most processing type Maximum size Minimum size diameter Length Wall thickness Angle
cnc turning 260mm*1100mm 0.1mm 0.2mm 0.25mm 30°
Processing Type smooth Semi-gloss matte Textured
Precision Die Casting A grade finish is made with a diamond polishing process that produces a shiny finish on injection molded parts. Grade B finishes use coarse sandpaper to produce rougher parts than Grade A parts. Custom-molded plastic parts with a B-grade finish have a matte surface texture. Grade C finishes use coarse grit to create a rough, uneven surface. C-finished injection molded parts have a matte surface texture. Grade D finishes use grit and dried glass beads or oxides to create a very rough textured finish. Depending on the type of material used, the product can have a satin or matte finish.

make smooth

Make smooth refers to a processing method that uses rough objects to change the physical properties of the material surface through friction....

Chemical Conductive oxidati

Conductive chemical oxidation forms a chromate film with a thin film, low contact resistance and certain electrical conductivity....

logo

In an increasingly competitive global market, strict management and correct use of a unified standard company logo will provide a more effective, clearer and more intimate market image....

silk screen

During printing, through the extrusion of the scraper, the ink is transferred to the substrate through the mesh of the graphic part to form the same graphic as the original....

parts sandblasting

The process of cleaning and roughening the surface of the substrate by the impact of high-speed sand flow....

spray paint

A processing method in which paint is atomized by a spray gun and applied to the surface of an object....

machining parts passivation

Passivation refers to the process in which the metal is oxidized by a strong oxidant or electrochemical method to make the surface into an inactive state, that is, passivation....

machining parts brushed

Surface wire drawing is a surface treatment method that forms lines on the surface of the workpiece by grinding the product, which has a decorative effect....

parts Micro-arc oxidation

Micro-arc oxidation, also known as plasma electrolytic oxidation, is developed on the basis of anodizing technology, and the resulting coating is superior to that of anodizing...

Anodizing of machining part

The so-called anodization of aluminum is an electrolytic oxidation process in which the surface of aluminum and aluminum alloys is usually transformed into an oxide film...

Part polishing

Machining parts polishing refers to the use of mechanical, chemical or electrochemical action to reduce the surface roughness of the workpiece to obtain a bright and smooth surface....

ZK61m Magnesium

As a high-strength magnesium alloy, ZK61M magnesium alloy material has a specific strength that exceeds the high-strength 7075 aluminum alloy....

AM60B Magnesium

AM60B magnesium is a magnesium alloy. It is quite ductile in magnesium alloys.It has fairly low thermal conductivity and moderately low tensile strength....

Magnesium alloys AZ31b

Magnesium alloys can be divided into two categories according to the manufacturing process: wrought magnesium alloys and cast magnesium alloys....

Magnesium alloy AZ80

Casting magnesium alloy AZ80 has high vibration resistance and heat absorption properties, so it is an ideal material for manufacturing aircraft wheel hubs....

AZ91D magnesium alloy

The products produced by magnesium alloy AZ91D are light in weight, die-casting can reach a tensile strength of about 290Mpa, and the thinnest can be die-casting 0.5 thick....

Aluminium alloy 7050

Aluminium alloy 7050 is an aerospace grade of aluminium combining high strength, stress corrosion cracking resistance and toughness....

6063 Aluminum alloy

6063 aluminum is widely used in the framework of building aluminum doors, windows and curtain walls....

7075 Aluminum alloy

075 aluminum alloy is a cold-treated forging alloy with high strength, far better than mild steel. 7075 is one of the most powerful alloys commercially available....

5052 Aluminum alloy

5052 aluminum alloy belongs to the Al-Mg series alloy and has a wide range of applications, especially in the construction industry, which is inseparable from this alloy....

6061 Aluminum alloy

6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process....

Sheet metal chassis shell m

What is the production and processing material of sheet metal chassis shell? What are the most commonly used materials? Today,...

Chassis shell various proce

When we first come into contact with the chassis shell industry, we must study it carefully, which is an intangible asset for the future....

Advantages and disadvantage

Advantages and disadvantages of magnesium alloys being widely used；Magnesium alloys are widely used because they have the following advantages:...

Magnesium machining

Using plastic machining the main machining methods are rolling, extrusion, forging, etc., the magnesium ingot is processed into materials the main products are plates, bars, profiles, pipes, forgings, etc.....

Magnesium casting machining

Cast magnesium alloys are used more than wrought magnesium alloys. Cast magnesium alloy is the most widely used light alloy in the aviation industry....

The use of magnesium alloy

In metal cutting, the cutting is performed on the fresh surface every time, the speed varies from a few millimeters to hundreds of meters per minute, and the pressure is as high as 2 to 3 GPa. ...

13 tips magnesium machining

Let’s talk about 13 tips about magnesium alloy processing. We hope to help you and reduce a lot of mistakes when processing magnesium alloys....

Aluminum alloy surface trea

Metal materials are used more and more in existing products, because metal materials can better reflect product quality and highlight brand value....

Aluminum alloy and metal ma

Aluminum alloy The alloying elements are copper, silicon, magnesium, zinc, and manganese, and the secondary alloying elements are nickel, iron, titanium, chromium, lithium, etc....

Five Skills of CNC Machinin

Around us, CNC machining is a very exquisite and complex technology, and it plays a very important role in CNC mold machining...

Is magnesium easy to catch

Magnesium alloy will not burn when placed at room temperature. However, attention must be paid to fire prevention during cutting....

magnesium machining Precaut

Magnesium alloy processing is so dangerous, you must pay special attention to it.Magnesium alloy cutting processing technology...

Magnesium alloy shell

We have been focusing on the processing of magnesium-aluminum alloy precision parts, the production of magnesium alloy shells and the processing of precision parts,...

laptop Chassis shell

The custom case design model of the laptop case is to place and secure the computer accessories for support and protection....

Rugged computer case

A ruggedized computer is a computer designed to survive a variety of harsh environments. When designing a computer, various factors that affect computer performance,...

Liquid-cooled chassis shell

Cyanbat produces all kinds of aluminum alloy chassis, aluminum alloy chassis, hardware chassis, hardware chassis, tablet computer chassis....

Camera parts

Processing of camera accessories, home camera structural parts, professional camera accessories, and camera accessories....

Rugged radar structure

This is a radar transceiver unit housing. The surface of the casing is painted including the upper casing and the lower casing....

military Laptop shell

military Laptop shell is Mil-Spec (MIL-STD 810F) compliant, waterproof, shockproof, and offers excellent accident protection...

Military reinforced chassis

Military chassis has the characteristics of waterproof, shock and vibration resistance, and excellent electromagnetic compatibility....