Methods to improve the aesthetics of sheet metal chassis processing :
1. The size of the sheet metal chassis should meet the requirements, and the error should not be too large.
2. The identification of the sheet metal chassis should be complete, clear, durable and reliable, and the identification serial number is indispensable.
3. Each panel of the sheet metal chassis should be flat, without distortion and deformation, and the openings on the cabinet door should be uniform and neat.
4. The columns of the sheet metal cabinet should not be twisted, and the parallelism between the two ends of each column connected to the upper and lower enclosures and the adjacent planes of the enclosure should be less than 0.5mm.
5. The coating on the surface of the sheet metal chassis must be uniform, without sagging and bottom exposure. The welding process of large frame is a processing method in which the welding parts are combined by heating or pressing, or both. According to the different states of the metal during the welding process, the welding methods can be divided into three categories: fusion welding, pressure welding and brazing, among which arc welding in fusion welding is widely used.
In summary, it is a method to improve the aesthetics of the sheet metal chassis processing appearance. The aesthetics of the sheet metal chassis processing will directly affect our sales performance and corporate reputation to a certain extent.
If we handle other aspects of the sheet metal chassis processing well,but we do not pay attention to the beauty of the sheet metal chassis degree, then the effect of our sheet metal chassis will be greatly reduced, so in the production process of the sheet metal chassis, we must pay attention to control some details, so that our sheet metal chassis is more beautiful and generous.
Previous: Sheet chassis machining requirements Next: How to choose industrial control chassis
Source: @cyanbat Author: cyanbat
The CNC machining process also abides by the machining cutting rules, which is roughly the same as that of ordinary machine tools....
CNC machine tools are automated equipment integrating machine tools, computers, motors, and drag, motion control, detection and other technologies.
...
The application of CNC technology has brought about qualitative changes in the traditional manufacturing industry, especially in recent years....
Chassis and cabinet sheet metal fabrication process, including many steps from cutting and bending to surface preparation, assembly and more....
Aluminum shell is an aluminum product obtained by extrusion process, which is different from cast aluminum shell, but the difference in process is different....
In our production field, various machinery and equipment are used a lot, and the actual production efficiency is also very good....
In our daily life, sheet metal chassis is a very common product, such as computer mainframes, communication equipment, switches and other chassis,...
The application of sheet metal chassis in our daily life is very extensive, and its types are also various...
The production process and equipment of metal magnesium are relatively simple, the construction investment is less, and the production scale is flexible; the purity of the finished magnesium is high;...
With the continuous progress of society and the continuous improvement of science and technology, the production process of metal magnesium has become more and more mature....
The cylinder block is the heart of the engine, so its casting quality is critical, and if it is well controlled, it can avoid or reduce the risk of the car's heart hitting....
When aluminum alloy die-casting, the liquid metal contains a lot of gas, and if the smelting is not good at this time...
There are two main problems in the processing of magnesium alloys: the low ignition point and the slow heat dissipation of the processing will cause the phenomenon of blue burning....
2022-08-15 18:26:27
make smooth
Make smooth refers to a processing method that uses rough ob...
2022-08-15 18:02:21
Chemical Conductive oxidation
Conductive chemical oxidation forms a chromate film with a t...
2022-08-15 17:55:49
logo
In an increasingly competitive global market, strict managem...
2022-08-15 17:52:49
silk screen
During printing, through the extrusion of the scraper, the i...
2022-08-15 17:10:15
parts sandblasting
The process of cleaning and roughening the surface of the su...
2022-08-15 17:06:15
spray paint
A processing method in which paint is atomized by a spray gu...
2022-08-15 16:43:00
machining parts passivation
Passivation refers to the process in which the metal is oxid...
2022-08-15 16:37:42
machining parts brushed
Surface wire drawing is a surface treatment method that form...
2022-08-15 16:33:27
parts Micro-arc oxidation
Micro-arc oxidation, also known as plasma electrolytic oxida...
2022-08-15 16:22:19
Anodizing of machining parts
The so-called anodization of aluminum is an electrolytic oxi...